Aico EI1529RC Hardwired Smoke Alarm Remote Test, Hush & Locate Switch , White

Product Information

Remote test and hush switch specifically designed for use with the Ei161RC, Ei164RC or Ei166RC, and with the Ei2110 series. Aico EI1529RC Mains Powered Remote Control Switch - functions The remote control is recommended for use in systems comprising of three or more interconnected smoke/heat alarms.The wall mounted switch unit locates, tests alarms or silences false alarms (only on 'R' models in the system) from an easily accessible low level switch position.

Test Switch: Allows the user to test all the interconnected Alarms at once from a convenient point rather than having to press the test button on each Alarm. Hush Momentarily pressing the Hush button switch allows remote silencing of false alarms. The system will reset automatically after approximately 10 minutes. In the unlikely event that a fire should occur during the Hush period the feature will be overridden when sufficient smoke has entered the sensor chamber of the smoke alarms in the system, or sufficient CO has entered the sensor of the CO alarms in the system. Note: The Hush feature will not operate if the CO alarm is sensing CO levels of 300ppm or above due to the increased danger.

This model of Control Switch is hard wired into the system, but there are wireless versions available. Easy to install using a 3 wire connection (Live, Neutral and Interconnect/Control) as standard smoke/heat alarm wiring The Ei1529RC is a wall mounted Remote Control device powered by 230V AC. It is recommended for use in systems comprising of three or more hardwired interconnected mains Alarms.

Locate, identify a triggered alarm: The triggered alarm can be audibly identified - and silences all others - automatically resetting after 10 minutes Test the alarm: All alarms on the system will sound. This is the equivalent of pressing the test button on each individual alarm Compatible with 3000, Ei2110e Multi-Sensor Fire Alarm, 160e Series alarms, 140RC Series alarms and hard wired interconnected Carbon Monoxide alarmsOur goal is to provide one stop place for electricians and electrical contractors, but we are happy to help other clients too. This remote control switch can only be interconnected via hardwire to communicate with compatible Ei Electronics Alarms and accessories. Up to 12 devices can be interconnected. Suitable for siting at any convenient point in the property. Up to 4 x Ei1529RC switches can be installed in a hardwired system along with a maximum of 16 x 3000, 2110e, 160e or 140RC Series smoke and heat alarms or 261ENRC Carbon Monoxide alarms. Carries the CE mark to indicate conformance to Low Voltage and Electromagnetic Compatibility Directives Wall mounted for ease of use can be fixed with surface mount box supplied, or will fit a standard recessed box (not supplied).

Wall mounted for ease of use – can be fixed with surface mount box supplied, or will fit a standard recessed box (not supplied) Please let us know should you like to discuss anything and we’ll get you in touch with an electrician who can provide a professional advice! The EI1529RC from Aico is a mains, 230V, powered remote control switch for use with their 2100 and 160RC series of smoke and heat alarms and with the 260 series of carbon monoxide alarms.Compiles with electrical safety requirements: EN61000-6-1:2007 Et EN61000-6-2:2005 (EMC Directive) and EN60065:2001 + A12:2011 (Low voltage directive) Locate Switch: If the Alarms are sounding, pressing the Locate Switch silences all but the originating Alarm, thus allowing easy identification of the source of the alarm. Up to 4 x EI1529RC switches may be installed together with a maximum of 20 x 2100, 160RC and 260 Series smoke, heat or carbon monoxide alarms