Superior Tool 37516 Pipe Cutter, Grey/Black

Product Information

Acteon’s expertise in drilling and decommissioning spans decades and covers the full lifecycle of a project from the acquisition of subsea information and data, to bespoke drilling packages to onshore disposal and recycling.

Pipe Cutters | Plumbing Tools | Screwfix

The EzyGrind inside cutter made it much easier to get at and square off the obstructed end of the pipe for repairs. In addition, often digging around the outside of the pipe was required to get the pipe cut at the right height, very slow and potentially dangerous work. The cutting head is extended by a pre-charged accumulator, allowing it to ride over seam-welds or non-conformities without any risk of damage to the manipulator assembly. With 2 sizes available, the internal pipe cutter comes with a 1 1/2" (36mm) or 3 1/8" (80mm) cutting blade for cutting 1 ½” - 6” (40mm - 150mm) diameter, schedule 40 pipe.Unique free flowing guide wheel design produces a clean, professional finish with one cutting action. All saw tooth internal pipe cutter models cut plastic pipe aggressively and can cut wood for sink lugs. To use an internal pipe cutter, simply place the cutter into the drill chuck and tighten it down until the blade is stable. Plus, the custom-designed high-speed diamond blade will easily cut your PVC, HDPE, ABS pipe and concrete with minimal effort. Once the blade is inserted, connect the power source to the drill, and place the blade into the pipe you are looking to cut.

Plastic Pipe Cutters | Pipe Cutters | Screwfix Plastic Pipe Cutters | Pipe Cutters | Screwfix

Once this cleaning/test pass is completed, abrasive is introduced to the HP water and a full cutting pass completed, including a 10 degree over cut ensuring complete severance. The Excalibur Internal Pipe Cutter is lightweight and portable, ideal for work in remote and confined spaces. One of the biggest complaints professionals have about other generic cutters is that they wobble when cutting through a pipe.James Taylor I used to cut down PVC pipes to install WC pans and slab repairs using an angle grinder.

Pipe Cutting Tool - NuTech Innovations Inc Excalibur Pipe Cutting Tool - NuTech Innovations Inc

The inside cutter features a custom-designed, electroplated diamond nickel blade that can cut a range of plastic pipe materials and concrete. The guide wheel is a dry running, self-lubricating bearing that delivers up to 6X faster cutting power at a controlled depth with significantly reduced tool vibration.Just insert the hex shank in any power drill chuck, choose one of two cutting guides for the correct pipe thickness, insert TigerFish Tools EzyGrind into the pipe and let the cutting blade cut from the inside out. Heat-treated steel, saw tooth blades on the IC1S, IC1SL,and IC3/4SL internal pipe cutters make for fast cutting.

Inside Pipe Cutter TigerFish Tools - Small Inside Pipe Cutter

Featuring an independent guide wheel that gives you maximum blade control, zero tolerance precise cutting, low friction, and reduced vibration.Once the cut is complete, power off the drill and use a deburring tool to clean the edge of the tubes. Used to cut off pipes below floor level or in the ceiling in new construction, around pools, and for replacement of closet flanges. The Excalibur Internal Pipe Cutter maintains a 20-30 minute cut time depending on wall thickness, condition of the pipe, and operator experience.