NB These lights require a 3-volt 350mA supply and must be wired in series when connecting two or more to higher capacity drivers - failing to do so will overvolt and destroy the LED. The LED light strips sit in the top and bottom of the niche. Once it is done, builders can install the niche into the shower wall. With its dimmable feature, the system can be used as a night light, Ostrom says. As these tiny spots do not have a driver attached, where would the driver be placed? I assume it needs to be accessible, but if it cannot fit through the hole of the spot where is the most common place to put the driver? I have a 500 mm wide x 1400 mm high x 300 mm deep alcove in a small bathroom. Can you suggest a suitable light to make it a bit of a feature? Advise your electrician that you have want these IP65 LED lights and that they need a DC driver. The electrician will run mains to the driver. The fitting is then installed to the driver.

Shower Niche Lighting and Shower Ceiling Lighting using LED Shower Niche Lighting and Shower Ceiling Lighting using LED

Highlight specific features: Niche lighting can be used to highlight specific features or objects in a space, such as artwork or architectural elements. By drawing attention to these features, they become more prominent and can create a more interesting and engaging environment. Fit low-level lights on a different lighting circuit, so you can turn just these on for a more relaxing shower. You can also fit lights into the floor, which act as uplighters, providing a wash of light up a tiled wall. How can I illuminate my shower enclosure/area? From a practical standpoint, proper lighting in a niche can make it easier to see and access the items stored there. It eliminates shadows and provides illumination to the contents of the niche, making it more user-friendly. Does not get hot and is suitable for fitting in wood, plastics, resins, ceramics, concrete, resins, metals etc.

Round or Square Option

I would like this light fitted into my new wetroom. How does electrician install them? What wiring will I need to ask for?

my own brand Shower Niche Light – Waterproof, Bathroom

Common places for locating a driver include loft space, airing cupboard, under bath, in sink vanity, kitchen cupboard, cupboard under stairs. behind a pierce of removable skirting board. Create ambiance: Niche lighting can be used to create a specific ambiance or mood in a room, such as a cosy reading nook or a romantic dining area. By using targeted lighting, designers can create a more intimate and personalised space. A lot of people like to create a relaxing environment in their bathrooms and niche lighting can help with that. Our niche is immediately below a main beam, allowing only limited height. Whilst we can lower the niche height we want to minimise this - keeping the niche as large as possible. What is the minimum depth you'd suggest we need?Flexibility: Niche lighting can be used in a variety of settings, from residential to commercial, and can be adapted to suit different styles and needs. It can be incorporated into existing lighting designs or used as a standalone feature. What Materials Are Needed for Niche Lighting? Our Mini Niche Spotlights are ideal for descrete lighting of Niches and Alcoves in Bathrooms. They are also suitable for use outdoors, due to being rated IP67 - temporarily submersible. From the light how long is the cable that goes to the driver? If they’re quite short are you able to extend them? Also does the driver connect direct to lighting circuit or via 3 pin plug?