Seagate ST3600057SS 600 GB 3.5-Inch Cheetah 15K.7 SAS Internal Hard Drive

Product Information

Seagate ST3600057SS Dell branded hard drive model number W347K offers storage capacity of 600gb with rotational speed of 15,000 rotations per minute and data transfer rate of 6gb/second hence making it one of the faster hard drive with rapid read and write performance. Additionally, this hard drive is compatible with Dell PowerEdge Servers and ships with hot-swap caddie for effortless installation. Moreover, hard drive has 3.5 inch SAS interface and ships with hot-swap caddie for effortless installation. Dell ST3600057SS Dell Part Number W347K is an ideal hardware for your PowerEdge Server to ensure reliability and performance for a mission-critical enterprise network. The seeker program reveals all of the 15K rpm SAS drives to have 3 - 5 ms average access time, which is to be expected for a 15K rpm SAS drive. With 600GB memory this server hard drive can simplify data management and enable scaling of operations. This larger storage capacity can provide faster access to data than smaller hard drives, improving server performance when dealing with large files or complex applications. Hard Disk Rotational Speed: Or you can review the article here for the bootable update method for harddrives https://dell.to/3qyHoIm The higher performance and capacity of Seagate Cheetah 15K.7 drives reduce storage costs per GB and increase capacity per watt. The drive has the industry’s highest reliability rating, reducing drive replacement costs. The Cheetah 15K.7 drive includes Seagate PowerTrim technology, which dynamically optimizes drive power consumption at all levels of activity.

Spindle Speed: ST3600057SS have high RPM (15,000 rotations per minute) making them suitable for application-intensive servers. In addition, they are highly reliable hard drives. Maak een einde aan de kosten en complexiteit van het opslaan, verplaatsen en activeren van gegevens op schaal. Unprecedented performance with a 16 percent increase in sustained data rate over the last generation, up to 171 MB/sec. Seagate Cheetah 15K.7 600GB 15K 6.0Gbps Serial SCSI / SAS Hard Drive ST3600057SS - Factory Recertified Specifications To put the ST3600057SS' performance in perspective, my 64GB SSD Mushkin MKNSSDCL averages 235 MB/s.Unprecedented performance with sustained data rate of up to 204MB/s - a 16 percent increase over last generation Dell PowerEdge 840, 1900, 1950, 1950 III, 2900, 2900 III, 2950, 2950 III, 2970, 6900, 6950, R300, R900, R905, T300, T605 Servers and PowerVault MD1000, NF100, NF500, NF600 Storage Arrays. Higher performance with fewer drives—reducing support infrastructure, physical space requirements and storage management costs When it comes to data recovery one of the most common problems Seagate ST3600057SS Hard Disk Drive experience is burnt circuit board(PCB). So if you will need to match a replacement PCB, it is important that you note the “ Board Number” of your current circuit board in addition to the hard drive’s “ Model Number“. The Fujitsu 300GB drives averaged 136 MB/s, the Seagate 450GB drive averages 166 MB/s, and the ST3600057SS averages 201 MB/s.

Seagate-exclusive enhanced Error Correction Code better maintains performance throughout the life of the drive and reduces the probability of lost data. Lower watts/GB ratio helps achieve reduced power and cooling costs while optimizing capacity requirements I found the SAS firmware to update but I didn't find the procedure do update in a Vmware ESX 5.0 environment.Longevity: Enterprise drives are designed for durability and have a longer operational lifespan compared to consumer-grade hard drives, reducing the need for frequent replacements and downtime.

Seagate PowerTrim technology provides a 62 percent improvement in GBs/W at idle over typical 3.5-inch hard drivesSpecifications Model number ST3600057SS Model Name Cheetah 15K.7 Form Factor(width) 3.5-inch Form Factor(height) 1-inch Height 26.1 mm W... Condition Compatibility: SAS and SATA drives are not interchangeable, as they use different connectors and protocols. SAS drives use a SAS interface and require a SAS controller, while SATA drives use a SATA interface and can be connected to a SATA controller or motherboard. Compatible Servers: This hard drive is compatible with the following servers; PowerEdge 2900, PowerEdge 2970, PowerEdge R200, PowerEdge R210, PowerEdge R300, PowerEdge R310, PowerEdge R320, PowerEdge R410, PowerEdge R415, PowerEdge R420, PowerEdge R510, PowerEdge R515, PowerEdge R520, PowerEdge R710, PowerEdge R720, PowerEdge R720xd, PowerEdge R900, PowerEdge R905, PowerEdge T100, PowerEdge T110, PowerEdge T300, PowerEdge T310, PowerEdge T320, PowerEdge T410, PowerEdge T420, PowerEdge T610, PowerEdge T620, PowerEdge T710, PowerVault Md1000, PowerVault Md3000, PowerVault Md3000i, PowerVault Md3200, PowerVault Md3220i, PowerVault Nx3100 Reliability: SAS drives are designed for high reliability and have a longer lifespan than SATA drives. SAS drives use enterprise-grade components and have advanced error correction and error recovery capabilities, making them more resistant to data corruption and drive failures. Please note that Enterprise Systems are required to be online 24x7x365 hence SAS-drives are designed to be powered on continuously unlike regular desktop or laptops are typically turned on and off multiple times. The BIOS and iDRAC versions look very old. In fact, you can update the BIOS and iDRAC versions gradually and try it with the ".exe" extension file via iDRAC, as Young said, it can update with iDRAC ".exe" files.