Black Micro Irrigation Pipe (Tube), 4mm/6mm - 50m

Product Information

Water Timer - The ideal timer for this project would be the Claber Dual Select, as it allows the irrigation system to be split into two zones with just one computer to control both lines.

Nut and Tail Tap Adaptor - Connect each of the water timer's outlets to the main supply pipe used in our system. One for each outlet. If you are using micro sprays on stakes, attach the micro-spray to the stake first, then position the stake in the ground as per your plan. Next, cut a length of micro pipe to reach from the main supply pipe to the inlet of the stake. We should aim to have a maximum of 30 cm of the micro tube to run from the main supply pipe to the micro spray. Pipe Stakes and Wall Clips - Available for 19mm, 13mm and 4mm pipe, stakes and wall clips are used to secure the tube in place. Use the stakes to secure the pipe to soil or wall clips to secure the pipe to walls and fences. Metres of 13mm Irrigation Supply Pipe - This is the primary carrier of water and runs past all containers we wish to provide water for. Anchor and fix the supply pipe in place using pipe stakes and wall clips. The ideal placement of stakes and wall clips for the main supply pipe is one every 50-150cm.for connection to the supply pipe, the base and 200mm dia. 650mm long PVC guard tube and an optional cast iron frame and cover. Irrigation Hole Punch - Used to pierce holes in the main supply pipe to connect the microtube of the micro sprays to the 13mm irrigation supply pipe. Our products include Drip irrigation, driplines, drippers, sprinklers, microsprinklers, pop up sprinklers, mini sprinklers, Tap timers, irrigation controllers, solenoid valves, solenoid valve manifolds, skid sprinklers, hose, hose fittings, tap fittings, hose reels, hose trolleys, pumps, tanks, and most irrigation related equipment. A micro spray irrigation system consists of a simple network of pipes with low-volume micro-sprays attached. These micro-sprays have been designed to irrigate or water small to medium size planting areas. The low-volume sprays installed for landscape and horticultural applications deliver a fine water spray covering one to three metres. Sprays used for agricultural applications, such as watering under vines and orchards, have a larger spray radius. A micro-spray irrigation system can provide efficient and precise water delivery to targeted areas in your landscape, nursery or orchard. selling composts and fertilizers, Horticultural sundries and tools.Keen gardeners are also welcome.

The first thing to do is set the compass to the scale of 3 metres for your drawing. This represents the spray radius of the micro sprays (for 1:100 scale, this would be 2cm). Then proceed to draw either quarter-circles (90° microjets), semi-circles (180° microjets) or full-circles (360° microjets) to best cover your planted areas. You can reduce the radius if required, but remember that you will need to choose vari-flow microjets to reduce the spray radius when you come to install them. Overlap the spray patterns to avoid dry patches. TOP TIP: Position sprays placed along edges or in corners 2-5 cm from the edge to prevent overspray onto paths, fences and walls. Cut the main supply pipe using your cutting tool of choice and create the network using the required fittings (elbows, tee pieces, stop ends etc.) as per your plan. Ensure your cuts are clean and perpendicular to the pipe to ensure the best connection to your fittings. Lay the main supply pipe around the area to be watered. The tube will be more manageable if warmed in the sunshine before use. Initially, position it with weights until it relaxes. We sell Plasson water meters from ARAD. We have meters for drinking water with WRAS approval, and also for industrial and Agricultural useFor corners of garden beds, use the 90° (quarter-circle) Microjet Sprays to ensure we don't overspray onto walls, fences or paths. 90° Microjet Sprays are used in conjunction with 180° Microjet Sprays. Our range of sprinklers is vast with Hunter Sprinklers, Orbit sprinklers, rolland sprinklers, Naan Sprinklers, Rainbird sprinklers, Toro sprinklers as well as specialist items such as the Manurain sprinkler for slurry and sewage. These sprinklers can be used for Irrigation, Cooling, Propagation, Dust suppression, damping down, and many other uses. TOP TIP: If you pierce a hole in the wrong place, use a micro blanking plug (aka Goof Plug) to close and seal the hole. Vari-Flow Spike Jets - These are pre-assembled to save on installation time. They feature a microjet spray head on top of a stake, a flow control valve to control spray radius, a short length of micro pipe already fitted and a tube adaptor. We choose six of the 180° versions and two of the 90° versions for our installation. The main supply pipe should ideally be laid within 20cm of the location of micro sprays if you have opted for the preassembled sprays on a stake with a short length of micro pipe. The longest length of micro supply pipe we want to use is 30cm.

Main Supply Pipes – A frequently asked question is, “Do I need to take the system in for the winter?”. The simple answer is no. You should, however, do your best to drain the system of excess water to prevent damage from freezing water. Remove all the stop ends in your system and any other connectors at low points that can help drain the excess water system. Water Timers, filters, and pressure reducers are expensive items and are sensitive to freezing conditions, so take care of them. Remove them from the system and empty them of any water. The best way to empty these items is to hold them upside down and give them a good shake—store them in a dry place, preferably indoors (not in a shed). Tricoflex hose has been used extensively in Horticulture, Sports and Amenity industries for many years.

Shipping

Downspray Wire Stake with Shut-Off - These are pre-assembled to save installation time, with an extended length of micro pipe already fitted, a tube adaptor, and a shut-off clip to stop flow when a tree is removed. Elbow, tee connectors, stop ends, etc. - Based on the plan's requirements, choose 13mm connectors to guide the pipe around the nursery and terminate runs. To accurately determine how much supply pipe we need for our irrigation system, we can draw a route the pipe will take from the water source to your irrigation system's endpoint(s) on the map we previously created.