Joined in 2023 
82 
63 About this deal
If required, new bare timber can be cleaned and de-greased with white spirit prior to application of wood preserver Ensure that wooden surfaces to be treated with Barrettine Wood Preserver are clean, dry and free from surface dirt, debris and other surface contaminates. New Bare Wood Areas that have been affected by mould, algae or fungi should be treated with Barrettine Mould and Mildew Cleaner
The best wood preserver you can buy in 2023 1. Barrettine Premier Wood Preserver (clear): Best wood preserver for all outdoor jobsWood preserver is basically an undercoat. You brush or spray it onto raw, freshly sawn or sanded wood surfaces to stabilise the wood’s moisture content and protect it from rot and decay. Wood preserver is designed to be applied on freshly sawn or sanded wood. You’ll get the best out of it if you sand down whatever wood you use it on, or at least pressure-wash and scrub it. Barrettine Premier Wood Preserver is a high-quality, low odour, oil based wood preserver that is deep penetrating. Barrettine wood preserver is used for wood protection against wood-destroying fungi (wet rot), wood discolouring fungi and wood-boring insects. It is moisture regulating and provides an adhesive surface for subsequent treatment with finishing paints or stains (top coat). It contains active ingredients effective against moulds, wood destroying and wood discolouring fungi as well as against wood boring insects.
One of our top wood preservers, Sikagard Wood Preserver, can be applied on damp or rotten wood and will get to work immediately. If your shed has seen better days, Sikagard is therefore your best choice. You’ll still need to remove as much surface grime as possible, though. Water-based wood preservers such as Cuprinol tend to be easier for most people to work with. They dry faster than most solvent-based preservers, and are much lower in VOCs (volatile organic compounds), the substances mainly responsible for petrol-type smells. Water-based products are also much easier to clean off brushes.How to choose the best wood preserver for you What’s the difference between wood preserver and varnish? If protecting the natural colour of the wood is important, use the clear preservative then overcoat with Osmo UV Protection Oil Extra or Fiddes Exterior High Build Wood Oil.
Apply by brush onto timber at a rate of 5 m2 per litre. Apply in 2 – 3 coats depending on the porosity of the wood species. Do not apply if rain is forecast in the next 48 hours to allow time for Roxil Wood Preserver to dry and the application of a top coat. No subsequent topcoat is required unless for aesthetic purposes. Barrettine Wood Preserver is for outdoor use and also for use on windows/frames, external doors/frames (internal & external sections). The Barrettine Wood Preserver Clear can also be used on structural timbers in unoccupied areas such as floor joists. Barrettine’s preserver does contain some wax for water resistance, but despite this it acts as a good base for paint and varnish. But it does a sterling job of repelling water, sun-fading, rot, insects and other wood-worriers all by itself, as well as bringing out the natural grain of the wood. You can also get a 5l version.Most wood preserver is a clear liquid that darkens the wood’s natural colour, but you can also get wood preserver that contains coloured dye, so it stains at the same time as protecting. Whether you go for clear or coloured is a matter of taste. H410 Very toxic to aquatic life with long lasting effects.EUH 208 Contains. May produce an allergic reaction. Clear, Odourless formula – Increases the lifetime of timber by preventing wood destroying, wood discolouring fungi and woodworm. Apply Barrettine Wood Preserver using a synthetic brush, microfibre roller or shed & fence spray system*
Great Deal 
New Comment