Owatrol Textrol Clear 2.5lt

Product Information

When first applied, Textrol will give the wood a rich, matt colour which will gradually lighten over time to the finished look. It is now available in 4 different colours for a range of looks all with premium protection. Why should I use Textrol? Penetrating wood oils are an excellent way to achieve long-term outstanding protection for your exterior wood surfaces. They penetrate deep into the pores of the wood, saturating it and preventing any moisture from entering. Also, as they protect from within, they do not form a film on the surface of the wood and so will not peel or flake. With solutions from Owatrol, there are 2 options if you are looking for a saturating wood oil – Textrol and Deks Olje D1. Protect your fence with Textrol In the previous two posts in our fencing series we discussed both choosing the right fence posts and how to set them correctly for your fence panels. In this next part we will be discussing the different types of fence panels and why they might be right or wrong for you. There are many things to consider: Textrol may only be applied to bare wood surfaces or a weathered wood surface that was previously finished with Textrol. All previous coating must be completely and thoroughly removed with a stripper and neutralized with Net-Trol before applying Textrol. If necessary sand the surface after cleaning and stripping (80 grit paper). After cleaning, allow the wood to dry for 2-3 days before finishing. Application of Textrol penetrating wood oil SLVK certified. The SVLK assurance scheme is a mandatory system that requires all timber from state-owned and private forests in Indonesia to obtain verification of legality – as a guarantee that the timber originates from legal, sustainably-managed sources.

per litre; actual coverage will vary depending on application method, type, texture, age and porosity of the wood. Application

Clean Up

Owatrol Textrol Penetrating Oil Finish is a deep penetrating solvent based oil which provides a long lasting UV and mildew resistant finish to wooden surfaces. Galette's highlights occurred early in camp before the hamstring injury flared up. cheap china jerseys Given that it has been so long since he has played, the coaching staff places more value in seeing Galette play in the preseason than, say, tight end Jordan Reed, who missed almost cheap nfl jerseys the first month with a toe injury. If you are painting vertical pieces of siding or even gates you should always coat and cover those from their tops to theirs bottoms.

Note: Do not create a film. Textrol HES is not a surface coating, its place is in the wood not on the surface. No need to apply to reverse of the board. For directions on surface preparation please refer to the technical sheet. Maintenance NB– If you apply the product with a sprayer, it is a good idea to go over it lightly with a brush or roller afterwards for better penetration. Application Textrol HES is a single coat saturating oil, developed to penetrate deep into softwoods and European hardwoods. Textrol HES has enhanced UV protection and a high solids content that protects the wood against the vagaries of the weather and UV rays. Having a luxurious matt-sheen finish Textrol HES enhances the grain and natural beauty of the wood. Properties With the excellent quality of our tension devices and our ability to customize, we can meet all your tensioning needs. Finding ways to save time and money in all your tensioning processes as well as increasing quality and production output for you product is what we strive for! Wet timber scrub off ground in dirt, while still wet apply Net-Trol Wood cleaner & Colour restorer 3) Leave for 10 – 20 minutes (do not allow to dry apply more Net-trol or damp with water mist)

Things to Remember

However, if the doors have a previous finish on them, it will need to be removed before application of Net-Trol and a finishing product.

Apply single coat Textrol HES with brush or roller in the direction of the grain making sure board is saturated Note:Do not create a film. Textrol HES is not a surface coating, its place is in the wood not on the surface. No need to apply to reverse of the board. For directions on surface preparation please refer to the technical sheet. Maintenance Apply a single liberal application of Textrol HES working in the direction of the grain. After 15-30 minutes brush out any excess to improve penetration and give a uniform finish. NOTE: Any rags, steel wool etc. soaked in Textrol may spontaneously catch fire if improperly discarded. These must be saturated with water after use or placed in a sealed, water filled metal container, before disposing with household waste. Restrictions After cleaning and/or stripping, allow the wood to dry for 2-3 good drying days or until it has reached a moisture content of 18% or less before applying the finish.If you are looking for a finish that brings life to older wood and allows the wood to shine through then Textrol is perfect for doing just that. It is also great if you are looking for a protection from the effects of moisture, UV rays and weathering.