You should take care when using this product, as it’s highly toxic to aquatic habitats. You should also take care not to spray it near plants. Apply in dry conditions when no rain is expected for up to 8 hours but you should also avoid applying it during intense sunlight. A further handy tip for heavy staining is to pre-wash the affected paving with "OxiClean", a product more normally associated with domestic laundry. At the earliest after 1 month from the treatment a dirty surface can be cleaned with Tikkurila Huoltopesu Maintenance Cleaner (1 part of Huoltopesu to 10 parts of water). Rinse the surfaces and allow to dry.

As you start to brush, you’ll notice that the bristles loosen the dirt with ease. Keep brushing until all of the dirt has been loosened,' Fiona says. 'You may have to put in some extra effort on stubborn areas. You should aim to brush your patio regularly to keep dirt away and to help keep the weeds away.' When switching to a new stain color, be sure the lens shields are dry, or use new shields so the old color doesn’t run onto the section of the patio with the new color. Don’t worry if a leaf or debris blows onto the wet stain. After the stain dries, remove the debris and touch up the stain (see the next step). Not usually. You will often have to wait a few hours before seeing any difference, and in many cases the effects will seem small at first, but the area will look much cleaner after a few days. Patience is key. Is there a way to clean my patio without buying patio cleaning substances? One bottle will treat up to 300 m², although this does depend on how porous the material being cleaned is. If your paving is made of permeable clay pavers or dry-laid pavers, you may find that more product is lost through the patio itself or through the gaps between the paving stones.Concrete – power floated, granolithic and smooth – surfaces should be roughened first to provide a good “key” for the paint. This can be done mechanically by abrading or blasting, or chemically, using Coo-Var Acid Etch. These processes will have the advantage in addition to preparing the surface of also removing dirt and laitance. Install a diamond masonry blade in a circular saw and set it to a depth of 1/4 in. The cuts don’t need to be deep—just enough to separate colors. Have a helper spray a water mist on the blade during the cut to contain the dust (Photo 1). Don’t use cheap abrasive blades for cutting concrete—you can’t spray them with water, and you’ll end up with dust all over your siding and windows. Apply 1-2 coats depending on the absorbency of the substrate and desired end result. Should you apply several coats, thinning for the first coat is recommended. Two coats are recommended for best results. Once applied ensure the floor is not subject to any contamination as this could cause the coating to fail.

To use this patio cleaner, dilute 1-part cleaner to 4-parts water, then apply with a garden sprayer or watering can. There’s no need for scrubbing or rinsing (which is always excellent news!). It’s best to use this product when there’s no rain forecast for 5 hours, which gives you more flexibility than those which require no rain for a few days. It also shouldn’t be used in very bright sunlight.Oil and Stain Resistance– We would recommend Centrecoat Premium HD Driveway Paint. If you are parking on your patio, this product will ensure any oil or fuel spills do not damage the paint. Promain specialise in quality anti slip solutions for internal and external floors. If you are looking to make your patio safe, take a look at our anti slip category for patio, paths and paving. You won’t be able to get the saw blade right next to the house, so finish off the kerfs with a masonry chisel and a hammer or a grinder with a diamond blade. Reserve enough stain of the same batch for one uniform surface to avoid possible colour differences. The product is translucent and therefore unsuitable to change colour of previously industrially dyed paving stone or slab. Stones or slabs of different age might turn out differently in terms of colour. Impurities like motor oil, crystallization of salts or other impurities have an effect on the final colour. FAQ’s My patio slabs are sealed…can I paint over them?

Patios are not a cheap commodity to replace which means when it comes to patio sealers, patio treatments or patio paints we strongly advise against settling for a cheaper alternative. Here at Promain we have spent years finding the perfect patio paint and patio sealers to make sure you will always be satisfied with the end result. Take a look at some staining work in our gallery of patio pictures. CAN YOU STAIN AN EXISTING CONCRETE PATIO? Depending on the look you want to achieve for your stained concrete patio, you can choose from acid-based chemical stains or water-based stains.

Introduction

To use this product simply dilute it at 1-part Algon to 3-parts water then apply with a garden sprayer, soft broom or watering can. With no need to rinse, application time can be kept short and sweet. Another of this product’s features is that it doesn’t require particularly sunny conditions to be essential for application. It can be used year-round to give your patio a serious spruce up. Proprietary rust removers such as RCI and Bero are very good * on the right substrate *. RCI, in particular, seems very good on crystalline stone (eg: granite) and uncoloured concrete. For a deep clean I like to use a cream cleaner like Cif and then scrub using a long handled garden broom,' says Laura Mountford, Cleaning Expert and Author, Live Laugh Laundry. 'This will help to remove stubborn stains.'

It contains Sodium Hypochlorite which can remove all sorts of dirt and debris. Having said that, it is highly toxic to plants, so a lot of care needs to be taken to not allow the solution near your plants. When choosing the best patio cleaner, it’s advisable to look for an option that isn’t unnecessarily abrasive. There are plenty of eco friendly/organic options out there which don’t contain bleach. Also, look for a pet friendly patio cleaner if you have either pets or children around the house. Overall, there’s no need to use chemicals that are harsher than necessary to get the job done! Cleaning a patio is equally easy. Apply and leave for 30 minutes, then scrub with a yard brush and rinse. The results are very good and, as this cleaner contains no dye, it won’t alter the colour of any light coloured surfaces. Lastly, there are products which don’t need rinsing. These can really save time and are so simple to use. After applying the solution, you simply wait for it to dry, and that’s it! No need to return to wash it off. This can be a great help if you’ve got other jobs to get on with. Cleaners with Long-Lasting Results For small items such as gravestones etc, N-Virol Algae & Lichen Killer solution may be applied by a brush provided the solution is flooded generously into inscriptions and other cavities

My Top Recommended Patio Cleaners

There’s also no shelf life, so if you don’t manage to use the 5 L bottle at once, it can be saved for a later date with no concerns of the effectiveness dropping. The ingredients of Wet & Forget patio cleaner are reactivated each time it rains. And there are plenty of opportunities for that in the UK! This product prevents regrowth for at least six months, although it can keep working for up to 12, making it the best patio cleaner for long-lasting results.