HATCHBOX 1.75mm Baby Blue PLA 3D Printer Filament, 1 KG Spool, Dimensional Accuracy +/- 0.03 mm, 3D Printing Filament

Product Information

Biodegradable: As PLA is made from organic sources, it is environmentally friendly and decomposes naturally. Baking : An electric convection oven is another option for drying your filament. You get a nice, dry heat and can bring your filament to slightly higher temperatures. Keep the filament in for a few hours to remove most of the moisture. As mentioned in the Post-Processing section, gas ovens produce a lot of moisture which could make your problems worse.

There are various types of 3D printing filament available for sale today that have different properties and require different temperatures to print. A Polylactic Acid (PLA) filament is one of the top choices for a good reason. Getting customer support from a company in the United States may be easier for those users located within the United States, as well. ConclusionThings changed in 2008 when the first 3D printing patents expired, freeing researchers and tinkerers from the threat of lawsuits. Around this time, researchers at Britain’s University of Bath introduced a concept they called the “ replicating rapid prototyper ” or RepRap. They wanted to create a low-cost, open-source 3D printer that could print most of the parts needed to build another RepRap. In theory, this would lead to an exponential growth in 3D printing availability and create a world of distributed manufacturing. By democratizing production, RepRaps would make everyday objects more repairable and affordable.

When reading specification sheets for various brands of PLA, you’ll notice that the difference in printing temperature values is the thing that stands out the most, as the components that a filament is made out of impact its melting point, which in turn affects the required print temperature. So, in a nutshell, you can use the standard PLA fan speed value of 100% for general-purpose printing when you’re using Hatchbox PLA as well, which will ensure you don’t experience any problems regarding cooling during your prints and provide you with the maximum print quality. Elephant feet : If you don’t have your slicer settings dialed in just right, the first few layers may get squished out by the layers above. When the part is done, the sides of the part will have a slight ridge at the bottom layers. You can grind these elephant feet away with needle files or sandpaper.

Dehydrating : Food dehydrators large enough to hold a spool are affordable and easy to find. They work by heating food to temperatures ranging from 35ºC to 70ºC and letting water evaporate over time. You can do the same thing with filament although it will take several hours for the heat to penetrate all the way through the spool. Since the dehydrator’s temperatures never approach the thermoplastic’s glass transition temperature, there’s no risk of damaging the filament. However, some users do suggest that working with a consistent filament is vital to people new to 3D printing. These users argue that novices will not be able to tell whether the inconsistencies in their work is due to their skills or their materials. During the Covid-19 crisis, Hatchbox has donated rolls of filament to people who are using 3D printing to make various personal protective equipment (PPE), such as face shields, mask ear saver tabs, and more. The smaller diameter does make 1.75 mm filaments more sensitive to inconsistencies in the manufacturing process. A 0.2mm variation in diameter changes the 1.75 mm filament by 11% but only changes the 3.00 mm filament by 7%.

Placing the object in an oven at a temperature high enough to soften the plastic without melting it does two things. First, it improves the bonds between layers which makes the part stronger when forces are perpendicular to the layers. Second, annealing gives the polymer strings more time to crystallize and make the material stronger. Also, you might occasionally get a spool where the filament is rolled too tightly. It’s not a common thing, but it might happen. According to the manufacturer’s specifications, the optimal nozzle temperature range for printing with Hatchbox PLA filament is 180 to 220 degrees Celsius, with no requirement of a heated bed for a successful printing process. Higher-end 3D printers can have two or more print heads so you can use different filaments in the same print run. Most commonly, this lets you use dedicated support material to make post-processing easier. Alternatively, you can combine flexible and rigid elements in a design without having to print separate parts. What Printer Should I Buy?There are other issues with annealing you should know. Softening plastic for an extended time can cause slumping and warping of thin pieces. If you plan to anneal a part, you will want to print it with 100% infill to ensure the walls and top surfaces don’t slump. Also, only use electric ovens to anneal printed parts. They are safer and can produce a more even heat. Joining High-Strength Filaments: Beginners won’t use materials like PC (polycarbonate), PEEK (poly ether ether ketone), PEI (polyetherimide), or PP (polypropylene). These advanced materials provide mechanical strength similar to metals at a fraction of the weight. This makes them common choices for commercial 3D printing. Most consumer-grade 3D printers, however, can’t handle the high temperatures needed to work with these materials. PEEK filaments, for example, require nozzle temperatures over 375ºC and bed temperatures over 130ºC.

When using paint to add color to your 3D printing projects, you do not have to worry about which company offers the color or colors that you need. Both eSun and Hatchbox have white and/or neutral color PLA filaments available. The thermoplastics used to make filament can be susceptible to environmental degradation. This changes the properties of the filament and can cause problems with your 3D printer or ruin anything you print. Thanks to the innovation spurred by the 3D printing community, you have a wide range of filament materials to choose from. Some are easier to work with than others. Some are better for structural purposes than others. The right choice will depend on your experience level, your printer’s capabilities, and what you want to print. Here are some of the filament materials you may run across.The commercial 3D printing industry changed as a result of the past decades’ rapid innovation, taking additive manufacturing beyond prototyping to become a true manufacturing process.