Upgraded NanoVNA-H4 Vector Network Analyzer, SeeSii Latest V4.3 10KHz-1.5GHz HF VHF UHF 4" Touch Screen Antenna Analyzer Measuring S Parameters, Voltage Standing Wave Ratio, Phase, Delay, Smith Chart

Product Information

Above, my cmd file also spins off an inverted colour version which is better suited to printing and some online display. locks up under the same conditions, which hints there might be a fundamental problem with the firmware, perhaps a memory leak. The benefits are larger SRAM 40KB from 16KB, larger flash 256KB from 128KB, faster CPU clock 72MHz from 48MHz, and floating point accelerator. The NanoVNA-H4 removes the two accessory RG174 cables and replaces them with higher quality RG-316 cables.

NanoVNA is a handheld Vector Network Analyzer (VNA) with small outline, originally designed by edy555. Looking into the future I can see more measurement points, averaging and a fft bandwidth implementation. The TX/RX method can measure the complete S11/S21 parameters (need to manually replace the transceiver port wiring). The NanoVNA-H4 vector network analyzer is a Hugen Origin that provides perfect vector network measurement capabilities, tiny and handheld, stand-alone with 4-inch LCD display, portable with 1950mAh battery powered or USB powered. Power off the NanoVNA-H4: Once you have completed your measurements, press and hold the power button for a few seconds to turn off the device.c. Move the marker across the frequency range by tapping the ‘<‘ and ‘>’ buttons or dragging the marker on the screen. Both an WebApp for google chrome and an Android app are available controlling the analyser and displaying measurements. Due to their delicate construction they are better suited to use on a bench, as opposed to outdoor antenna work.

This NanoVNA RF demo kit is composed of a PCB to assemble, to perform tests or demonstration of RF integrated circuit (DIP) and SMT (SMT) components. On initial examination, it appears to work properly, I could slide a piece of paper between case and touch screen so it does not seem to have the problems that plagued earlier models where the screen did not work because of pressure from the case. The firmware from DiSlord optimised user experiences and improved measurement speed, and alsoadded some useful automated measurement functions. Like I posted earlier, don't consider this a stamp of approval as I only use a very small subset of the firmware's features but still this 1.

Some of talking head hams got the hardware for free to review but outside of unboxing it, that's about all you get. The calibration loads and cables aren't great, but you'll pay as much as the entire nanoVNA for better options; once you've read online guides for working with a nanoVNA, it does a good job measuring impedance and SWR for your antenna designs. c. Adjust the chart’s appearance by customizing the colors, line width, and other settings if desired. In that case, my only criteria was firmware that didn't lock up requiring the VNA to be power cycled to recover.