B. Beyond the 14days but within warranty, a full refund and replacement are not available, but repair is acceptable. I scouted the Internet and found that, low and behold, if the build plate does not have a rough surface, there will not be anything for the UV resin layer to adhere to. For ensuring that the print sticks to the flex plate platform, I also roughened it with 80 sandpaper and a random orbital sander - now the prints adhere super to the flex plate, the flex plate adheres super to the platform. This makes it easier to remove prints without possibly causing the build plate to become un-leveled. There are now many 3D printer build surfaces: glass plates, PEI print beds and magnetic steel plates are just a few of the numerous options with which you can equip with your 3D printer.

Our build platform is equipped with a large non-slip hexagon socket screw for effortless leveling and remains stable and long-lasting level during printing. I’m look forward to more of your hacking or your blueprints for the real Pro version of this machine!Our build plate is made of aluminum alloy, ensuring that it is sturdy, durable, and non-deformable with good flatness, providing a stable and reliable platform for your 3D printing needs.

Our build plate features an oxidized sandblasted surface for stronger model adhesion, ensuring a higher printing success rate and easy printed model removal. The rate of laser power drop is related to the frequency of use, working hours, and working environment. One observation: my hypothesis I stated in a my previous experiments about surface reflectiveness affecting the size of elephant foot seem to be correct – with the shiny, nearly mirror-like surface I get much larger elephant foot. I have tested this with my Mars 3 build plate, but if the mounts are the same as any of the other Elegoo machines, it will also work for those build plates as well. Zřejmě originální magnetická podložka z gumy je dost slabá, navíc mám tiskárnu s plochou 120×192 mm.Masters student at FI MUNI and a member of the ParaDiSe laboratory, where works on software model checking. By accepting these services, we are able to show you videos or other media content hosted by external providers. Some mention that the magnetic part sticks well to the build plate, the adhesive is strong, and the backing sticks very well to it.

the magnet pad can detach from the platform if the glue is dissolved by IPA or similar agents (has happened to me). Vše fungovalo hezky dokud jsem nezačal tisknout velké kusy a navíc s různými plochami, větší plochy byly spíše do jedné strany (nešlo to rozdělit jinak). I am printing directly to the sheet (the reason I purchased this) but as the sheet is warping up at the edges, resin is getting underneath and the final print does not have a flat bottom. apart from the relevelling I changed NO settings on the printer and set it of to print an adaptor for an Airsoft RIF, 56 minutes later and I have 2 adaptors firmly stuck to the flex plate, gave them a push (wearing gloves) and they were firmly stuck to the plate, grabbed a tab to remove the plate as as I pulled the plate off, one adaptor popped off into my hand, the other stayed on, I gave the flex plate a slight bend and the other adaptor popped off. Fortunately, there are companies laser cutting an arbitrary shape out of them on laser or water cutter.Váš nápad dat nedojmové magnety je asi lepší ale, protože uběhlo nějaký čas ptám se jestli funguje pořad dobře a nestane se vám že se při tisku posune? Thanks to a specially patterned surface, our steel plate has improved adhesion compared to most original platforms, which greatly increases the success rate! I pealed the backing off the magnetic sheet, lined it up and stuck it to the build plate, I then left it on a flat surface with some weights on the top of the plate and left it over night to allow it to stick well and truly. This slips over the existing piece of sheet metal, extending it to accommodate for the extra build plate height. Compared with ordinary 2K LCD 3D printers, its printing volume is 37% higher than Mars 2, XY accuracy is up to 35 microns, 30% higher than Mars 2 series, higher printing efficiency, more stable performance, and less maintenance.