This mitre box consists of a base board and a top board which can be clamped down to hold a length of skirting board. The guitar fret mitre box can be screwed to a workbench using the mounting holes provided to ensure a firm and stable base. Coving comes in a range of sizes (both depth and height) and an adjustable coving mitre box is suitable for all coving up to 280mm (11″) across the ceiling and 223mm (8.75″) down the wall.

Coving mitre - These boxes can be adjustable to accommodate different sized coving, or non-adjustable for standard-sized coving. It features a curved base to support more delicate coving types to ensure a precise cut Tiler's mitre - Usually made from steel and treated to prevent corrosion, this mitre box is used to make cuts on tile trim that runs along the top edge of tiles The ability to adjust the miter box for multiple angles and cuts can make projects much easier and more efficient. Look for models that allow for adjustments so you can get precise results without having to constantly reposition the box every time you need to change the angle or depth of your cut. Number of CompartmentsThere are numerous types of mitre box available, some for specialist craftsmen like guitar makers and some for DIYers who require a multi-purpose tool. There are metal base stops fitted into the base of the mitre box that can be adjusted so that the box can accommodate a variety of sizes of coving. Mini mitre boxes are typically made from either plastic or aluminium. The aluminium mini mitre box will generally have a longer life expectancy than a plastic alternative.

A multi-purpose mitre box is typically made from lightweight, high impact ABS plastic which is hard-wearing and suitable for use in all conditions. Multi-purpose mitre - Designed for general-purpose woodworking, these mitre boxes tend to include a 22.5° slot as well as the usual 45° and 90° slots With the toe clamped into a vice for stability and the mitre standing upright, a cut at 45 degrees can be made, cutting down following the Tufnol surfaces.

Multi-purpose mitre boxes are ideal for cutting a range of workpieces such as skirting boards, coving, dado rails, plastic piping and many more. For skirting larger than 230mm (9″) or smaller than 150mm (6″) a different type of mitre box will be required such as a multipurpose mitre box. Multipurpose mitre boxes can be used on a range of workpieces, including skirting boards, dado rails, coving and general carpentry work where a precise and accurate mitre joint is required. The skirting board mitre box is specifically designed to accommodate a set size of skirting board. There are two sizes available: a 150mm (6″) and a 230mm (9″) version. They are not suitable for cutting mitres on other types of workpiece.

Adjustable mitre boxes allow a variety of sizes of workpiece to be held securely in place as the mitre box walls can be adjusted to match the size of the workpiece . The coving mitre box has a curved base to support the coving to prevent it from flexing and ensures a more accurate and neat 45 degree or 90 degree cut. The skirting board is placed between the base board and top board and clamped down using the thumb screws. Mini mitre boxes are often referred to as model makers’ mitre boxes as they are frequently used by model makers in conjunction with a razor saw to create intricate and delicate 45 degree and 90 degree cuts. Most multi-purpose mitre boxes come with two workpiece clamping posts and guide slots that allow for 22.5 degree, 45 degree and 90 degree cutting angles.

A sturdy base with non-skid feet helps to keep the miter box securely in place during operation, minimizing wobbling and providing smooth cuts. Look for heavy bases that provide adequate support while cutting larger pieces of wood. Precision Mini mitre boxes are typically small with fine saw guides for intricate and delicate 45 degree and 90 degree saw cuts. Mini mitre boxes often come with clamping posts to hold the workpiece safely and securely for neat and delicate precision work. Mini mitre box - Sometimes called a 'model makers' mitre box', these boxes are designed specifically for small, delicate cuts, such as those found on models. Guitar fret mitre boxes are designed specifically for cutting the grooves for frets on a guitar. The saw is placed between rollers to allow for a very smooth and accurate cut.