Hold the program button down for 2-3 seconds. The LED Connection Indicator will slowly flash, signaling the controller is in program mode. The Spectra Enhanced also gets the RGB treatment, with lighting around all of the face controls and the entire edge of the device. There are seven colors available as well as a mode that cycles between each color. It doesn’t look half bad, and it’s easy enough to turn the light off if RGB isn’t your thing. WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. this device must accept any interference received, including interference that may cause undesired operation

Isle of Man, Isle of Wight, Northern Ireland and the Scottish Highlands) may take longer to reach you.The Regulatory Compliance Mark is a visible indication of a product’s compliance with all applicable ACMA (Australian Communications and Media Authority) regulatory arrangements, including all technical and record-keeping requirements regarding the electrical safety and/or electromagnetic compatibility (EMC). For warranty details or support with your authentic PowerA accessories, please visit PowerA.com/Support.

The process offers numerous options, but it’s not at all intuitive. You practically need to keep the instructions around for reference. An app for setting and uploading gamepad configurations would have been a much better option. Responsive Gameplay In general, I have mixed feelings about the utility of putting audio inputs on controllers: On the one hand, it’s easier to make adjustments on the fly with them than with a headset’s onboard controls. On the other, the controls only work with 3.5mm wired headsets that you plug into the controller, which fewer and fewer headsets use as their preferred means of connection. The audio controls do not impact the controller negatively at all, so it isn’t as if I don’t appreciate their presence, but their value is actually more niche than you might realize at a glance. PowerA Enhanced Wired Controller – Gaming A: Confirm you are using the Player #1 controller. For more troubleshooting refer to your Xbox console User Manual. WARNING: READ BEFORE PLAYING The programmable Zone you’re in will flash 3 times. To toggle through the 3 Zones, press “Right” on the D-Pad. Note that Zone One is the default starting zone.NOTE: To remove the cable, squeeze two side buttons near the port and pull gently. USB cable also includes an inline releasplug closer to the end of the cable that will disconnect when needed. For player and controller assignment reference your official Xbox user’s manual. There’s a USB port at the front as well, which isn’t just for occasional use. This is a wired-only controller. There are pros and cons to that. The wired connection is latency-free, of course, and also cuts out the price of a battery and the need to keep it charged up. For PC gamers, that’s a perk over the standard Xbox One controller, which needed fully-charged batteries even when you were playing with a wired connection.

Connect the 10ft USB cable by plugging it into any available USB port on your Xbox console. Connect the other end to the Micro USB port on your PowerA EnhancedSpectra Infinity Wired Controller. Hold down the Xbox Button until your console powers “ON”. The controller’s LED Connection Indicator will illuminate to indicate your controller is connected.

Feels Like a First-Party Controller

A: Confirm your TV is set to the proper Video Input and that you can see the Xbox console interface on your TV screen. The CE mark is a declaration from the manufacturer that the product meets applicable European Directives and Regulations for health, safety, and environmental protection. The Enhanced Wired Controller creates a reasonably comparable experience to the standard Xbox Series X controller. Aside from the wired connection, which provides the standard performance benefits and potentially inconvenient logistical limitations, there are very few times where I noticed what controller I was using. That may sound derisive, but it’s an endorsement: Since the controller costs nearly half as much as the first-party default, “comparable” is a significant achievement.

NOTE: Advanced Gaming Button assignments will remain in memory even after disconnected. RESETTING ADVANCED GAMING BUTTONS Playing video games can make your muscles, joints, skin or eyes hurt. Follow these instructions to avoid problems such as tendinitis, carpal tunnel syndrome, skin irritation, or eyestrain: This is all customisable thanks to the inclusion of a simple LED button on the rear side of the controller. Holding this down for a couple of seconds initiates LED Program Mode and from there a push of the D-Pad to the right will let you scroll through the Zones. From there, making the most of the four face buttons will set your colour type, each unique to the buttons themselves. This means that hitting the A button will cycle through five different types of green, whilst Y will cover the yellow angle, B that of red and X of blue. Mixing and matching will see you able to have the Spectra glowing all manner of colours. A very small percentage of individuals may experience epileptic seizures when exposed to certain light patterns or flashing lights. Exposure to certain patterns or while playing video games may induce an epileptic seizure in these individuals. Certain conditions may induce previously undetected epileptic symptoms even in persons who have no history of prior seizures of epilepsy. If you, or anyone in your family, have an epileptic condition, consult your physician prior to playing. If you experience any of the following symptoms while playing a video gameThe UKCA (UK Conformity Assessment) mark is a declaration from the manufacturer that the product meets applicable UK Regulations for health, safety, and environmental protection. This device must accept any interference, including interference that may cause undesired operation of the device.